• Welcome to EmbroideryShristi Forum. Please login or sign up.
 
November 14, 2019, 08:41:23 pm

News:

Welcome to EmbrodieryShristi's Forum


poor design registration

Started by newbee, June 18, 2012, 12:01:44 am

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

kkmixs

Hello newbee,June 18, 2012, 12:01 am

Thank you very much

Visit Embroideryshristi website for embroidery designs and tons of freebies.
http://www.embroideryshristi.com/


Do not forget to download the daily freebies at the website.

Embroideryshristi website is not responsible for any of the designs uploaded on this forum under "Designs by shrist members" because they are freebie or uploaded by the memebers.

kkmixs



newbee

At some point everyone has experienced poor design registration. Often, one has a large fill edged with a column or satin stitch, and the fill and its outline do not meet. The first thing you need to determine is, was the design digitized correctly for the material you are working on. An experienced puncher positions the column stitches more inside or outside the fill. This is called pull compensation, and it makes the column sew exactly where it should when running on the specific fabric it was punched for.

Improper hooping and using the wrong backing are two other common causes of poor registration. Creating the correct fabric tension in the hoop is critical for good registration. The sewing field should be taut, but not so tight that it will alter the garment when it is removed from the hoop. Hoops that are too tight may cause the fabric to stretch out too far, creating a bagging effect, or it may cause hoop burn. Hooping too loose will allow the fabric to pull loose form the hoop while being embroidered, causing poor hoop registration.

It is important to use just enough backing to stabilize the design area. Experiment to see which backings work best for different jobs. Talk to experienced embroiderers to see what kind of backings they use for different applications. It may help to keep a record of these findings for future reference.

As one final note, make sure the backing is completely engaged by the hoop to ensure an even tension in the sewing area. 



Source:http://embroiderysoftware.co.za/machine-embroidery/how-to-prevent-poor-design-registration
"If I don't digitize well,
I have not failed. I've just found 10,000 ways that won't work."

Quick Reply

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Note: this post will not display until it's been approved by a moderator.

Name:
Email:

Shortcuts: ALT+S save/post or ALT+P preview