TUTORIAL TO BRING THE DESIGN IN CENTER AND SET THE NEEDLE POINT TO AUTO START AND END OPTION.
Many a times it happen that even though the designs is in center position it is giving out of hoops or out of box error.This is because is not in center positions.This generally happen when the designs is edited and it is saved after editing the designs. Generally, we use the scroll bar to bring the designs is in the center of the screen but it doesn't mean that designs is in the center position. Design is said to be in the center when the X and Y axis is set to zero.
Following are the step will show you how to bring the designs in the center positions using 'WILCOM TRUESIZER';1) Open the design.
2) Check the axis bar given at the top left side of the screen, just below the file menu.If it is not set to zero then it mean that designs is not in center position.In the following image the X and Y axis is not zero and still designs seem to be in the center.
(http://img.techshristi.com/images/embroideryshristi/capture.jpg) (http://img.techshristi.com/images/embroideryshristi/capture.jpg)Center and auto start and end the design
3) To make the design in the center position just change the value to zero and press enter on the keyboard.
(http://img.techshristi.com/images/embroideryshristi/11111.jpg)Above the step will bring the designs in the center of the both axis but it would be better if we check the starting and ending point of needle before saving the designs.
4) So , click on the designs tab given at the top of the wilcom true sizer and click on the Auto Start and End option.This will open the new diagloue box.
(http://img.techshristi.com/images/embroideryshristi/untitled_2.png) (http://img.techshristi.com/images/embroideryshristi/untitled_2.png)Center and auto start and end the design
5) Once a new diagloue box open, change the setting as shown in the given image below and then click 'OK'.
(http://img.techshristi.com/images/embroideryshristi/capture_2.jpg) (http://img.techshristi.com/images/embroideryshristi/capture_2.jpg)Center and auto start and end the design
This will bring the needle point to the starting point and will start and end the machine automatically as shown position in the image.In my opinion it would be better if one make it habitual of checking the designs position and needle point before saving the designs.This will help you to avoid the un necessary problem with the machine embroidery.This is step toward the Professional digitizer.You can even check the video tutorial for the same at the below link (Link to the video tutorial in our gallery (http://forum.embroideryshristi.com/media/item/173/)):
How to Center the designs using Free Wilcom True sizer tutorial (http://www.youtube.com/watch?v=0CCaCz-o6sM#ws)